PTFE Insulated Wire & Cables



PTFE Cables have outstanding mechanical & electrical properties. They are heat resistant and have its application for temperature range from -65 °C to 260 °C.

In most adverse industrial conditions, where chemical fumes & other liquids make all other types of cables are vulnerable, PTFE polymer becomes an excellent solution as it is chemically inert to most of industrial chemicals. Its outstanding di electric properties even at high elevated temperatures make it suitable for harsh industrial applications.

ELTEC PTFE wires conforms to US Military MIL – W – 16878D and Indian defense specifications JSS 51034.

As per these standards, PTFE wires are classified in three main working voltage grades.

GRADE SPARK TESTING DIE ELECTRIC TESTING
ET (250 V) 2500 V AC 1500 V AC
E (600 V) 3400 V AC 2000 V AC
EE (1000 V) 5000 V AC 3000 V AC


Get A Quote Download Datasheet Contact Us


As per these standards, PTFE wires are classified in three main working voltage grades.

  • Hook up wires for high temperature panels
  • Equipment for Aircraft, Defense, Satellite & Radar
  • High Performance Motors, Transformers & Rectifiers
  • Wire Harness assembly
  • Electronics & Communication Equipment
  • Process Instrumentation
  • Medical & Scientific Instruments
  • Sensors, Load Cells & Pressure Transducers
  • Wiring for Heaters, Ovens & Furnace
  • Thermocouple & RTD Cables
  • Continuous use up to 260 °C
  • Intermittent use up to 300 °C
  • High dielectric values resulting in excellent space & weight saving
  • Inert to most chemicals & fluids even at elevated temperature & pressure
  • Unaffected by oils, lubricants & hydraulic fluids
  • Non flammable, non toxic, resistant to solder iron damage
  • Suitable for high frequency operation
  • Immune to agene, fungus & water absorption
  • Resistance to UV resistance & stress creaking
  • High strain & abrasion resistance
  • Conductor - Soft Annealed silver plated or nickel plated copper wires as per MIL – 16878D.
  • Core Insulation - Spirally Wrapped PTFE Tape and Sintered
  • No. of Core - Single or Multi core
  • Construction - Twisted for Multi core cables
  • Outer Sheath - Spirally Wrapped PTFE Tape and Sintered
  • Screening - Silver Plated Copper wire or SS Wire

WIRE SIZE AS PER MIL


PTFE INSULATED HOOK UP WIRE

ELTEC PTFE Insulated hook- up wires are used extensively for both electrical and electronic equipments. Hook- up wires are required to perform in increasingly critical environments. Cost effective production methods necessitate uniform wire handling characteristics, such as strip ability, strand uniformity, precise dimension and permanent colors.



PTFE INSULATED POWER CABLES

ELTEC PTFE Insulated Power Cables are used for critical high temperature Industrial applications near boilers, furnaces, ovens etc. in processing plants. PTFE wires normally come with silver plated copper wire conductors (190°C) or nickel plated copper wire conductors (260°C on request).



PTFE INSULATED INSTRUMENTATION CABLE

ELTEC PTFE Instrumentation Cable products are used for signal and energy transmission with minimum interference, and the they are sunlight, heat, and moisture resistant means they can survive in some of the toughest conditions.



PTFE INSULATED MULTICORE SHIELDED CABLES

ELTEC PTFE Insulated Multi Core Shielded cables are specially designed for its application in electronics & communication equipments, Various equipments for satellite, defense, Radar & Space applications.



PTFE INSULATED RTD CABLE

ELTEC PTFE Insulated RTD CABLESare generally used to transmit signal from RTD sensor to control unit.

Multi stranded SPC conductors are used and are available in 2 core 3 core, 4 core, 6 core, 8 core or even more as per requirement. They are further SPC shielded or outside SS Metal braided as per requirement.



PTFE INSULATED THERMOCOUPLE CABLES

THERMOCOUPLE CABLES are used to transmit signal from Thermocouple sensor to control unit. J, K, T, E, N, R, S etc. type of Thermocouple & Extension grade cables. They are available in flat & twisted pair construction. They can be further shielded or outside SS Metal braided as per requirement.